• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 345 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

tms320f28335

Tesfaye Meberate
Intellectual 370 points
Part Number: TMS320F28335
Other Parts Discussed in Thread: CONTROLSUITE

Tool/software: Code Composer Studio

currently i am developed simple direct torque control of induction machine drive software using code composer studio v6, but i seen from controlsuit we have already developed open source code for direct field oriented control  using tms320f28335/28035, the kit used is TMDSHVMTRPFCKIT, can i test my software to this kit with out any worry about damage, is that this kit developed considered out side of field oriented drive, some one have a solution/idea about this please help me. thank you.
best wishes

  • 0
    TI__Guru** 115440 points
    Yes, you may run any motor control algorithm based on C2000 MCU on this kit if you follow the Kit's Hardware Reference Guide to use it, not only the algorithm in controlSUITE, you need to refer to the device configuration of example project in controlSUITE, and make sure the current and voltage is under the tolerance value of h/w kit, all these parameters could be found in hardware reference guide of the kit or its schematic.