This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV2605LEVM-CT: connection to USB2ANY

Part Number: DRV2605LEVM-CT
Other Parts Discussed in Thread: USB2ANY,

Hi, I  encountered similar problem.

I have connected DRV2605LEVM-CT and USB2ANY.

And i followed the instruction of manuals.

But unfortunately I didn't connect boss with Haptic Control Console. (images are added)

Could you send a USB2ANY firmware update to me ? Thanks~ we use DRV2605LEVM-CT

And firmware update instruction too, please.

Best regards


  • Hi!

    Welcome to E2E and thank you for your interest in our products!

    Could you upload again the images, please? It seems that they cannot be downloaded.

    In addition, do you have information about your Windows version? Which version are you using? The DRV26xx EVMs are not compatible with the last Windows versions yet.

    Best regards,
    Luis Fernando Rodríguez S.
  • Hi Luis-san

    Thank you for your quick reply.

    Fortunately, I solved the problem by ourselves.

    How to update USB2ANY for DRV2605LEVM-CT is shown on Page 7 of Haptic Control Console GUI User Guide .

    We encountered next problem that I2C signal connection descriptiopn is uncertain on same manual.

    I had opened the USB2ANY upper cover and checked connection.

    The result is shown below.

    Anyway, thank you for your kindly support.

    Best regards,