• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 29 subscribers
  • Views 439 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV8704: Predriver Fault

NAOKI AOYAMA
Guru 11215 points
Part Number: DRV8704

Hello,

Our customer use the DRV8704, have a question about PDF function.

It is mentioned " If excessive current is detected ...... " on the DS.

How much is the value of  excessive current?

Best Regards,

Naoki Aoyama

  • 0
    TI__Expert 8985 points

    Hi Aoyama-san,

    How the PDF function works is as follows:

          1. We monitor the external FET’s Vgs during on and off. We have an analog comparator to detect the voltage to see if the Vgs over or under 1V. 

          2. If predriver is to command the external FET to on, then after 2.2us, we will look the comparator output, if output is high, then no fault, otherwise flag a fault. The 2.2us time is fixed.

          3. If predriver is to command the external FET to off, then after 2.2us, we will look the comparator output, if output is low, then no fault, otherwise flag a fault. The 2.2us time is fixed.

  • 0 in reply to Hector Hernandez Luque
    Guru 11215 points
    Hi Hector,

    Thank you for your reply.
    I understood the working of the function.

    Thanks,
    Naoki Aoyama