This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV2605LEVM-CT: Does the Haptic Control Software Tool support the DRV2605LEVM-CT

Part Number: DRV2605LEVM-CT
Other Parts Discussed in Thread: DRV2625, USB2ANY

I have just purchased a DRV2605LEVM-CT ( and a DRV2625LEVM-CT) .

How does one get the DRV2605LEVM into GUI mode so that it can connect to the Haptic Software Tool( V1.5.4)?  I see the EVM listed in the Software tool drop down, but the "connect" is greyed out. Iassume until the EVM hardware is out into GUI mode much like the DRV2625 EVM is.

The Haptic software is listed on the DRV2605LEVM-CT web page as a related tool, but is it really supported?

  • Hi, Tiger,

    The DRV2605LEVM-CT is supported by this haptic software tool. However, you would need of an additional hardware to fully control it. Otherwise, you could only use it in demo mode.

    As mentioned in the Haptic Control Console User's Guide, this EVM requires of an additional hardware called USB2ANY, which allows the PC to fully control the EVM through the GUI.

    www.ti.com/.../slou502a.pdf

    Please let me know if you have additional questions or comments about this. We will be glad to help you.

    Best regards,
    Luis Fernando Rodríguez S.