Hi team,
My customer is using the DRV8846EVM. In the DRV8846EVM GUI, the decay mode pull-down menu is glayed out and can't choose it.
Could you tell me how to enable the decay mode pull down menu?
Regards,
Saito
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
My customer is using the DRV8846EVM. In the DRV8846EVM GUI, the decay mode pull-down menu is glayed out and can't choose it.
Could you tell me how to enable the decay mode pull down menu?
Regards,
Saito
Hi Wang5577,
Customer can see the COM port correctly and they can rotate and stop the motor using GUI successfully.
They also can change the setting of Speed and "I FULL SCALE". The decay mode tab is only glay-out.
Could you give me any other advice to enable the decay mode tab on the GUI?
Regards,
Saito
Hi Wang,
Customer can select the decay tab now by following your advice.
Thank you for your support.
Regards,
Saito