Hi,
I want to use DRV8850 for my current project.
Under datasheet Section 8.2.3 a typical delay between logical enable nSLEEP and motor current of 250us is specified.
Please let me know the maximum value.
Regards
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
I want to use DRV8850 for my current project.
Under datasheet Section 8.2.3 a typical delay between logical enable nSLEEP and motor current of 250us is specified.
Please let me know the maximum value.
Regards
Hi Kevin,
You can expect the maximum value to be <1ms.