Other Parts Discussed in Thread: DRV8800
Dear Technical Support Team,
I have a question about the capacitor connected between CPH and CPL.
There is an instruction to use 0.1μF of X7R characteristic on datasheet.
I would like to change this to a small ceramic capacitor (1005 size) for EOL of ceramic capacitor , but the actual capacitance is about 0.06μF.
1). Is this capacitance (0.06μF) acceptable for the charge pump to function properly?
2.) If it is not acceptable, please tell us how much capacitor should be connected specifically.
3.) Is X7R required for temperature characteristics? (For example, is X5R use NG?)