This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV2625: Please tell me the procedure to control the DRV2625EVM-MINI with USB2ANY.

Part Number: DRV2625
Other Parts Discussed in Thread: USB2ANY,

Hi Team,

I bought DRV2625EVM-MINI and USB2ANY for LRA drive.

When using the DRV2625EVM-MINI with USB2ANY, which version should I use with the firmware of USB2ANY?
VDD(=3.3V) was not output, when "DRV-USBCOM-EVM_v1p4" described in Haptic Control Console GUI User Guide (SLOU502A) page 7 (USB2ANY Setup Instrusructions) was used.
The CS of your company suggested updating the firmware with USB2ANY Explorer Software and tried to execute it, but even with that, I could not work with the Haptic Control Console GUI.

Therefore, please tell me the procedure to drive LRA with DRV2625EVM-MINI using USB2ANY again.

Best Regards,
Tom Liu