DRV8872-Q1: UVLO in full temperature range

Johnny Guo

Part Number: DRV8872-Q1

Hi, team,

My customer used DRV8872-Q1 in OBC system. They use device UVLO as some fault reporting threshold.

In datasheet, only 25C data is marked, could you supply the UVLO typical and temperature curve? The temperature range is -40~125C.

Thanks.

Johnny

over 3 years ago

0 Rick Duncan over 3 years ago

TI__Guru** 114905 points

Hi Johnny,

The Typical number is for Ta=25C, VM=24V.

The max number is over recommended operating conditions.

0 Johnny Guo over 3 years ago in reply to Rick Duncan

TI__Expert 4910 points

Rick,

My question is what is the UVLO typical when temperature is not 25C, like -40C, 0C, 85C, 125C.

Thanks.

Johnny

0 Rick Duncan over 3 years ago in reply to Johnny Guo

TI__Guru** 114905 points

Hi Johnny,

Why is the typically value important at other temperatures?

The max value is the important value.

When VM falls below "VM falls until UVLO triggers" max value, any device may enter undervoltage lockout.

When VM rises above "VM rises until operation recovers" max value, all device have exited undervoltage lockout.

0 Johnny Guo over 3 years ago in reply to Rick Duncan

TI__Expert 4910 points

Rick,

Customer will set DRV8872-Q1 UVLO typical as one fault reporting voltage, so they require for UVLO in all temperature range to make this fault voltage accurate with DRV8872-Q1 working status.

Thanks.

Johnny

0 Rick Duncan over 3 years ago in reply to Johnny Guo

TI__Guru** 114905 points

Hi Johnny,

I have contacted you directly to ask for additional information. For now, I will close this thread.

Motor drivers

Motor drivers forum

DRV8872-Q1: UVLO in full temperature range