Hi
Now we use I2C to control DRV2625 and set TRIG/INTZ to low
If we set TRIG/INTZ to high, anything happen? Or any register value will change?
Thank you~~
Poki
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi
Now we use I2C to control DRV2625 and set TRIG/INTZ to low
If we set TRIG/INTZ to high, anything happen? Or any register value will change?
Thank you~~
Poki
Hi, Poki,
This pin can be configured as trigger-edge, trigger level (enable bit) and interrupt mode. However, none of these functions affect the registers values when the pin state changes.
Best regards,
Luis Fernando Rodríguez S.