This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV8412: DRV8412

Part Number: DRV8412

Hi, I 'm using the DRV8412 driver in parallel full bridge mode but no truth table is provided about how the output is controlled.

I'm particularly interested in the truth table for the parallel full bridge mode of the device.

Thanks,

Gideon

  • Hello,

    Figure 15 of the datasheet is shown below. The figure states that PWM_A controls OUT_A and OUT_B and PWM_B controls OUT_C and OUT_D. I have also added a truth table below.

    PWM_A PWM_B OUT_A & OUT_B OUT_C & OUT_D
    0 0 LOW LOW
    0 1 LOW HIGH
    1 0 HIGH LOW
    1 1 HIGH HIGH