This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV8837: Motor driver

Part Number: DRV8837

Hi,

I have connected nSLEEP, IN1, IN2 to the controller GPIO's.  Everything is working fine but when I check the current that my circuit draws when nSLEEP = 0, it shows 1.1mA (exclusive of other peripherals on board). The datasheet says that the total current when nSLEEP = 0 is in nA.  Am I missing something?

Thanks