• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 29 subscribers
  • Views 905 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV8701EVM

Bohdan Jedlicka
Expert 1265 points
Other Parts Discussed in Thread: DRV8701EVM

Hi All

I did buy DRV8701EVM board. I would like save installed firmware before I will start developing my SW. How to do it? Thank you.

  • 0
    TI__Guru** 114905 points
    Hi Bohdan,

    The software is available in the software files of the DRV8701EVM tool folder

    www.ti.com/.../drv8701evm

    You can use this folder to re-load once you have completed developing your code.
  • 0 in reply to Rick Duncan
    Expert 1265 points

    Dear Sir

    Thank you for fast responding. What  I did do. I did install HWl . Next I did install GUI. Next, I did run it together with success . I did also import source code of DRV8701EVM to CCS and built it with success. My experience is to save pre installed FW before I will load processor from CCS. Next, I did install Flasher. I think that I did use bad name for parameter -n or it requires some USB debugger. Now I am studying BSL.