regarding this post, does the answer in the forum post applies to both the auto-calibration and diagnostic modes?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
regarding this post, does the answer in the forum post applies to both the auto-calibration and diagnostic modes?
Hi, Anjli,
You are right, that answer applies to both the auto-calibration and diagnostic modes.
In addition, the diagnostics process will assert a flag if a short or open load is detected. Also, the auto-calibration routine may fail if the load is not attached or glued to a heavy mass (usually around 100g).
Please let me know if you have additional questions or comments.
Best regards,
Luis Fernando Rodríguez S.