BLDC motor driver with PID control option

Jonathan Geronga

Other Parts Discussed in Thread: TIDA-01585

Hi Team,

I would like to seek assistance for our customer product request.

Here is the requirement for BLDC motor driver with PID control option (IC and EVM):
- Control 10 ~ 25W class motor using Hall sensor.
- Motor driver Vcc: 5V or above
- Motor Voltage, current : 12 or 24V, 2.3A_Max

This is to control the shaking caused by the slight speed difference that occurs at the constant speed of the motor.

I read this document below regarding "Sensored 3-Phase BLDC Motor Control Using MSP430" but there's no BLDC motor driver IC product mentioned:
http://www.ti.com/lit/an/slaa503/slaa503.pdf

The nearest I found is TIDA-01585 but is a PI control so I hope you can recommend a more fit to customer request.

Thanks!

Jonathan

over 4 years ago

0 Vishnu Balaraj over 4 years ago

TI__Mastermind 24405 points

Hi Jonathan,

I think TIDA-01585 would still be the best option. Did you try looking into the PID macro in MSP430? I think the code can be modified by adding a derivative control to the existing PI Control.

Regards,

Vishnu

0 Vishnu Balaraj over 4 years ago in reply to Vishnu Balaraj

TI__Mastermind 24405 points

Hi Jonathan,

Do you have an update on this? Were you able to resolve the issue?

Regards,

Vishnu

0 Jonathan Geronga over 4 years ago in reply to Vishnu Balaraj

TI__Expert 7930 points

Hi Vishnu,

Im sorry for the delay in my response.
I did not anymore receive feedback to the customer

I will now resolve this thread and you can close this.

Thanks for your support

Jonathan

Motor drivers

Motor drivers forum

BLDC motor driver with PID control option