Recently ultrasonic fault detection equipment, ultrasonic signal to interception equipment abnormal state (about 25kHz~35kHz), while lower than the frequency of signal and is not sensitive to TI if there is a chip or module recommended
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Recently ultrasonic fault detection equipment, ultrasonic signal to interception equipment abnormal state (about 25kHz~35kHz), while lower than the frequency of signal and is not sensitive to TI if there is a chip or module recommended
Hello Chen,
I am not clear on what you are describing for this design. Please review this Reference Design and see if it is similar to what you require. This page has a link to an Eval Module (EVM) and an automobile ultrasonic application: www.ti.com/product/PGA450-Q1/toolssoftware .
~Leonard