This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCD3138064A: Error 2012. Trouble removing debug state

Part Number: UCD3138064A
Other Parts Discussed in Thread: UNIFLASH

We are using DSLITE (CLI version on Uniflash) to load program to device. 
We can see that the flash operation succeed. 
Upon flash, we are getting this kind of error message.

Tool: XDS110 debug probe

How can we get rid of this error message?

  • Hello,

    1) Despite the error, is the program still running as expected?

    2) Do you get the same error when programming using a) UniFlash GUI b) CCS?

    3) What version of UniFlash are you running? Based on the emu pack version, it appears to be an older version. Can you try using the latest version?

    Thanks

    ki

  • 1) Despite the error, is the program still running as expected?

    -Yes. DSLITE is still running and logs "Success" after the error message.

    2) Do you get the same error when programming using a) UniFlash GUI b) CCS?

    - Ecountered same error when using Uniflash 4.6.0 GUI

    3) What version of UniFlash are you running? Based on the emu pack version, it appears to be an older version. Can you try using the latest version

    -Now using Uniflash 4.6.0. I already updated the emupack from 8.2.0.00004 to 9.2.0.00002 and tried. Result: same error

    Tried to update also Uniflash to 6.3 but encountered "Error on initializing emulator" upon running DSLITE

  • Tried to update also Uniflash to 6.3 but encountered "Error on initializing emulator" upon running DSLITE

    Can you try the UniFlash GUI? Please make sure the other tools are closed and try disconnecting and reconnecting the cable to the XDS110