This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS7A8101: Minimum NR and bypass capacitor

Part Number: TPS7A8101

We are currently using the linear voltage regulator TPS7A8101 to clean-up analog power supplies.  The noise reduction capacitor and the bypass capacitor are 470 nF like recommended in the datasheet.  The start-up time is about 80 ms because the noise reduction capacitor is 470 nF.

I would like to use the TPS7A8101 to supply some digital components.  I don’t need a low noise supply for those components but I would like to have a more faster start-up time (about 1 ms).

Is the TPS7A8101 work properly with no noise reduction capacitor and no bypass capacitor?  If not, what are the minimum value?