Dear team,
Our customer have a question of output ripple.
I attach a question.
Regards,
PAN-M
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Dear team,
Our customer have a question of output ripple.
I attach a question.
Regards,
PAN-M
Hi PAN_M,
The customer's calculation is correct. The difference in the calculation and the waveform, is that the FB hysteresis (10 mV) is only a typical number.
The waveform shown in Figure 8-3 is typical for this device.
Regards, Jason