Hi Team,
I see there is amplitude peak to peak voltage 1.7V typical for RT/CT pin in datasheet, just want to check the max positive side and min negative side voltage on RT/CT pin. 1.7V should be Vpositive-Vnegative. Thanks.
BRs
Given
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
I see there is amplitude peak to peak voltage 1.7V typical for RT/CT pin in datasheet, just want to check the max positive side and min negative side voltage on RT/CT pin. 1.7V should be Vpositive-Vnegative. Thanks.
BRs
Given
Hi,
The low-end peak is at 0.3V or so, and high-end peak is at 2.0V or so. There is no negative peak voltage. The design should only need to know the peak-to-peak about 1.7V based on the datasheet.