Dears,
In TPS54623 datasheet, we just list the 4 layer layout information.
But currently customer want to use 2 layer board.
So whether TPS54623 support it?
Thanks a lot!
Best Regards,
Rock Su
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Dears,
In TPS54623 datasheet, we just list the 4 layer layout information.
But currently customer want to use 2 layer board.
So whether TPS54623 support it?
Thanks a lot!
Best Regards,
Rock Su
Hi Rock Su,
Obviously a 4 layer layout/PCB has the potential of offering a better electrical and the thermal performance .
You are going to have less ground/cooling planes (less copper) in a 2 layer layout.
But that does not mean that a careful 2 layer layout will not work.
Hope this helps,
Regards,
Yitzhak Bolurian