BQ24610: Reference code for power charging process for BQ24610

Zhang Johnathan

Part Number: BQ24610

Hi,

Currently we worked on battery charging with BQ24610 on the platform of Linux & RK3399. Is there any reference code for the battery (power) charging process with BQ24610?

Battery charging process includes: Precharge, Fastcharge Current Regulation, Fastcharge Voltage Regulation Phase, Termination, Enable and Disable Charging
. Any reference code for this process?

Thanks

Johnathan

over 2 years ago

0 Michael Emanuel35 over 2 years ago

TI__Mastermind 29985 points

Dear Johnathan,

This is a standalone part meaning there is no software required. Here is an FAQ for the schematic checklist

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/791790/faq-bq24610-bq24650-bq24610-bq24650-schematic-review-design-tips

Thanks,

Mike Emanuel

Please click "Resolved" if this answered your question.

0 Zhang Johnathan over 2 years ago in reply to Michael Emanuel35

Prodigy 20 points

Dear Emanuel,

Thanks a lot for your reply.

Just as a clarification: normally mcu or cpu controls the battery charging process via the battery charging chipset. According the reply, from my understanding, BQ24610 will control the battery charging process by itself, without any additional mcu. MCU only needs to monitor the charging status. Even BQ24610 could work without any mcu.

Could you please confirm it?

Thanks a lot!

Johnathan

+1 Michael Emanuel35 over 2 years ago in reply to Zhang Johnathan

TI__Mastermind 29985 points

Dear Johnathan,

Yes that is correct!

Thanks,

Mike Emanuel

Please click "Resolved" if this answers your question.

0 Zhang Johnathan over 2 years ago in reply to Michael Emanuel35

Prodigy 20 points

Got it, thanks a lot!

Johnathan

0 Michael Emanuel35 over 2 years ago in reply to Zhang Johnathan

TI__Mastermind 29985 points

You're welcome!

Thanks,

Mike Emanuel

Power management

Power management forum

BQ24610: Reference code for power charging process for BQ24610