TLV803: Request to share material content report of TLV803SDBZT with PCN#20210210002.1 change

Hi Matt,

I believe you will find the report for TLV803SDBZT here:

https://www.ti.com/materialcontent/en/search?partType=tiPartNumber&partNumber=TLV803SDBZT

Ben

Hi Ben,

The report which can be obtained at the website is before the PCN#20210210002.1 change.

Because, according to the PCN, there are some changes and one of them is lead finish.

I made sure the lead finish described in the report is same as before the change.

Could you ask someone to get the report with the PCN#20210210002.1 change.

Thanks,

Matt

Hi Matt,

Let me ask around and get back to you.  

Ben

The TI CSC should use this link for the Product Content report request and add the affected PCN# 20210210002 for reference:

https://sps16.itg.ti.com/sites/prodcont/Lists/ProductContentReportRequest/2014%20to%20current.aspx

The TI CSC should use this link for the Product Content report request and add the affected PCN# 20210210002 for reference:

https://sps16.itg.ti.com/sites/prodcont/Lists/ProductContentReportRequest/2014%20to%20current.aspx

Hi Lisa,

We cannot open the link, it might be restricted in TI internal.

We hope to have the report with excel file.

Thanks,

Matt

Please submit a request through the TI Customer Service Center (ti.com/csc) for information to be provided.

Hi Lisa,

We’ve already requested it to TI CSC with request number#CS0434669, however no response.

Thanks,

Matt

Hi Matt,

Please be patient, it will take some time to get a response for your request.

Ben 

Hi Ben,

We've been waiting for feedback from CSC for 3 months.

On the other hand, our customer has requested to submit the report again and again.

Thanks,

Matt

Let me see what I can do Matt.  Thanks for letting me know it has been 3 months.

Ben

We appreciate your kind assistance, Ben. Thanks, Matt

Hi Matt,

According to the PCN details, there was no impact on Material Declaration.  Just curious, did you get your PCNs mixed up?  The PCN letter that you received should show that there were no changes or impact on the Material Declaration.  See below:

Ben

Hi Matt,

Are there any other questions regarding the PCN and the material declaration?  If not, please kindly close the thread by clicking on "resolved".  Thank you and good luck to you!

Ben

Hi Ben,

Could you make sure the PCN again please ?

The screen shot which you insered is different from PCN#20210210002.1 .

Thanks,

Matt

Hi Matt,

Can you please share with me what you are seeing?  Thank you,

Ben

Hi Matt,

I believe I have the right information for you now.  See below.

You are correct that there are changes to the material declaration.  The Material Declaration report will be available once production has commenced.  In the PCN report, it says,

I hope this answers your question.  Thanks Matt!!

Ben

Hi Ben,

Thank you for making sure the letter. The new screenshot is same as my one.

However, we need material content report with PCN#20210210002.1 change to get an approval from our customer soon.

Otherwise, we cannot deliver the product with PCN change.

i.e. we have to continue to deliver the product without change until getting the approval.

We think TI always gathers material information from suppliers and collects them up as material content report.

So, we believe TI can provide the material content report before production release.

We'll share the Lisa's comment to CSC.

On the other hand, it'll be really helpful if you could help us to get the material content report soon. (if you can do something...)

Thanks,

Matt