TIDC-SMARTPLUG-WIFI: TIDC-SMARTPLUG-WIFI

fedi makni

Hello,

I would like to ask several questions regarding the TIDC-SMARTPLUG-WIFI Link: https://www.ti.com/tool/TIDC-SMARTPLUG-WIFI#supportandcommunity

1: Are we able to purchase the product?

2: the BOM file contain a custom transformer T1, could you please provide an alternative P/N in order to use for this reference design?

3: Does the design work with non polarized plugs like Japanese plugs?

4: Is the device isolated? in the schematic i found R24 which connect GND to neutral_in. could that cause any problems?

Looking forward to your help and thank you for your cooperation.

Best regards.

over 2 years ago

0 fedi makni over 2 years ago

Prodigy 90 points

Another question if it's ok

5: What's the PCB material used and what's the thickness?

Thanks again for your support.

0 Michael Reymond over 2 years ago in reply to fedi makni

TI__Mastermind 40965 points

Hi,

The TIDC-SMARTPLUG-WIFI design is not available for purchase in a fully assembled state. You will need to use the provided design files to create your own PCB, obtain the components listed in the BOM and assemble it on your own.

I am looping in a team member from the HW team who can answer your other questions.

Regards,

Michael

0 fedi makni over 2 years ago in reply to Michael Reymond

Prodigy 90 points

Hello,

I think it's a little difficult to purchase all the components as some of them are mentioned as custom parts. So i think it will be much easier if you could provide any alternative components for those one for example the transformer.

Thanks

0 Seong Kim over 2 years ago in reply to fedi makni

TI__Mastermind 34330 points

Hi fedi,

As Vince mentioned in your other thread, we no longer support this reference design. For power design questions, I would create a new E2E post and reach out to our analog power team here.

BR,

Seong

Power management

Power management forum

TIDC-SMARTPLUG-WIFI: TIDC-SMARTPLUG-WIFI