Other Parts Discussed in Thread: LM5050-1
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
LM5050-1 should be able to drive 2 Mosfets in parallel.
But remember that,
As the no. of FETs in parallel increases, the gate capacitance increases. With a fixed Gate source and sink current capability of LM5050-1, the turn ON and turn OFF times will be increased with increase in gate capacitance.
With the LM5050-1 Gate pin source current value specified in the datasheet and the Ciss/Qg values of the FET selected, you can calculate the time required to turn ON the FET.
Please refer to the documents below to understand more on how to calculate the turn ON time ,