LMQ61460-Q1: LMQ61460-Q1

Jean Finders

Part Number: LMQ61460-Q1

When I make a design in WebEnch using LMQ61460AASQRJRRQ1, can I replace it with LMQ61460AFSQRJRRQ1 without changing schematics?

Thanks for help,
Greetings,
Jean Finders

over 3 years ago

0 Andy Chen over 3 years ago

TI__Mastermind 27775 points

Hi Jean,

Yes, no need to change the circuit for this replacement, but the light load eff will drop if FWPM version is used.

B R
Andy

0 Aosker Liu over 3 years ago in reply to Andy Chen

TI__Prodigy 520 points

Hi Andy

follow this forum, customer reply:

Our schematics is nearly the same as the LMQ61460-Q1 EVM-Modul (with LMQ61460AFSQRJRRQ1). Without load output-voltage is 5.1 Volt. Wenn we increase the load Output-voltage dorps. What could be the problem?

Regards

Aosker

0 Andy Chen over 3 years ago in reply to Aosker Liu

TI__Mastermind 27775 points

Hi Aosker,

You can check the voltage on the Vout sensing point of top feedback resistor, if voltage on this point is stable, then problem is caused by improper output sensing or too high trace resistance between Cout and load point.

B R

Andy

Power management

Power management forum

LMQ61460-Q1: LMQ61460-Q1