This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS566231: Required Pull-up resister on EN pin connected with MCU open-drain pin.

Part Number: TPS566231


According to the datasheet P.14, "The EN pin is pulled high internally."  My customer controls ENABLE on EN pin by MCU's open_drain pin.  When connecting ENALE pin with MCU's open_drain pin,  what value of pull-up resister is required?  Please let us know,

Thanks and best regards,