This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS25910: Ic-load definition

Part Number: TPS25910

Hello Experts,

I would like to know definition of Ic-load in equation 11 of the datasheet. Ic-load is maximum load current, correct? If no, please correct me.
[condition]
Vin: 5V
Ic-load: 3A
C-load: 47uFx2

delta T= (47u*2*5)/3 = 156.667u
Cext = 11u * (156.667u /5) - 200p = 144.6674pF <= Is the calculation correct? If so, can I use 100pF for Cext?

Best Regards,
Fujiwara

  • Hi Fujiwara,

    Ic-load is the max  current through output cap during startup. During startup the current will go through the cap and other load connected at output. So we have to ensure that total current during startup<5W/VIN. So if the load at efuse output during startup draws X current . Let us assume current through output cap to be Y then we have to ensure that X+Y<5W/VIN,X+Y<1A(in our case).

    So for correct calculation, we have to know is there any other load another than capacitor at efuse output that  will draw current during startup?

    Regards

    Kunal Goel

  • Hi Fujiwara,

    Do you want to continue discussion on mail or here?

    Regards

    Kunal Goel

  • Hi Kunal-san,

    I would like to discuss on e-mail. I will close this thread.

    Regards,
    Fujiwara