This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM5140ADESIGN-CALC: FET Selection

Part Number: LM5140ADESIGN-CALC
Other Parts Discussed in Thread: LM5143-Q1, LM5140-Q1

Hi Experts,

the LM5140ADESIGN-CALC seem to always recommend the same FET. Even when Vin is exceeding the max voltage of the IPC50N04. Is there an issue or is this part not updated by the tool?

BR Simon