This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS7A52-Q1: How to choose ferrite for L-C

Part Number: TPS7A52-Q1
Other Parts Discussed in Thread: TIDA-01022


At the moment, I am developing a printed circuit board that is very remotely similar to TIDA-01022. There are many power lines on the board that need to be separated by LC-filters. Unfortunately, I dont know how to choose the right ferrite bead. I managed to make a LC-filter for TPS62913RPUR using datasheet, but I don’t know what to do with the rest of the positions :(.  I would be very happy if you could help me with the choice, as well as suggest how to choose an ferrite bead on my own. An example of one of the power lines is attached below.