• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 154 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ25790: BQ25790 possible to charge 3S battery with >3A ?

Dirk van Almsick
Prodigy 40 points
Part Number: BQ25790

I would like to use BQ25790 solution for charging a 3 cell lithium battery (end of charge voltage ~12.45V). The device will be controlled by external MCU via I²C connection.

Is it possible to set higher charge currents than default 1A for this configuration (we plan to use USB PD power supply up to 45W).

  • 0
    TI__Guru*** 143910 points

    Hi Dirk,

    Yes, you can change the charge current up to 5A assuming you have enough input power to support that much power.  The charger input current max is limited to 3.3A unless you disable input current limit.

    Regards,

    Jeff