This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ2084-V150: Changing the default address

Part Number: BQ2084-V150


We have an application where a large number of packs, each with a BQ2084 are to be monitored by a central control hub.

If however we proceed with one SMBus line per pack the hub would require multiplexing and a large amount of wiring.

Therefore the plan is to daisy chain the packs together, with the hub polling data from each one at a time.

I can find however no information on how the SMBus address of the BQ2084 can be changed through configuration or whether it is possible.