Hi
The voltage of the SW pin, why does everyone write -0.3V in the under voltage part?
Because the customer uses a differential probe to open the full bandwidth measurement and it is -0.5V
Thanks you
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi
The voltage of the SW pin, why does everyone write -0.3V in the under voltage part?
Because the customer uses a differential probe to open the full bandwidth measurement and it is -0.5V
Thanks you
Hi Gareth,
The -0.3V is the ESD protection for each pin.
Thanks,
Richard