Due to the U.S. Thanksgiving holiday, please expect delayed responses during the week of 11/22.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC39002: UCC39002 & TPS2413 for Vcc and driver question

Part Number: UCC39002
Other Parts Discussed in Thread: TPS2413


1. Can the voltage of UCC39002 PIN8 is divided as the reference voltage for TSM103 Pin5, as shown in the figure below?
    Or it can be used by TSM103 without a voltage divider resistor?

2. Is OK for TPS2413 to drive two MOS? Or do I need two of TPS2413 to connect MOS separately?

Waiting for your feedback, thanks, and regards.