Other Parts Discussed in Thread: LM5170
Hello,
I design a DCDC Converter around LM5170 with 520W out power.
My design work correctly but I have thermal problem on my board. I try EVK with 500W out power and it work without Heatsink.
I hope can work without heatsink, just with a better PCB with more layer.
My board is 4 layer PCB with 70um copper outer layer and 35um copper inner layer.
I would add 4 layers more like LM5170_EVK but i would like to know the copper thickness of EVK PCB.
I don't find this informations on application note of EVK.
Where I can find this on?
Or can you send me this information on private message?
Thanks,
Luc,