• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 220 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLV62595: TLV62595DMQR

Shreehari G P
Prodigy 210 points
Part Number: TLV62595

We have designed 5V-0.7V, 4A(Maximum output) Buck converter for our internal project. Kindly review the design and let me know the comments.

I have also included webench link, which I used as the reference.

webench.ti.com/.../11

  • 0
    TI__Genius 14110 points

    Hi Shreehari,

    I am not able to open the WEBENCH link that you have shared.

    But I have checked your schematic. It looks fine to me. Just make sure that saturation current value of your inductor should be greater than switch current limit (I_LIM) mentioned in the datasheet (4.8A-5.6A).

    Thanks and Best Regards,

    Farheen

  • 0 in reply to Farheen
    TI__Genius 14110 points

    Hi Shreehari,

    If you don't have further queries, I'm closing this thread. You can re-open it by posting your comments here.

    Thank you.

    Best regards,

    Farheen