TLC6A598: TI solution suggestion

Jimmy Lai

Expert 6845 points

Part Number: TLC6A598

Dear Team,

Our customer need a LED driver to drive attached LED lighting, can you help me to find the suitable solution?

Make sure the IC spec can be met with the attached LED with following parameter.

Vin=4.5V in our side
Vout to support attached LED with voltage 2.65V to 3.55V
Current rate should be at least 1A.
Signal control: PWM type
Operating temperature:-40~85oC

Many Thanks,

Jimmy

over 2 years ago

0 Frank Qiu over 2 years ago

TI__Genius 15776 points

The max current for each channel is 350mA. they should parallel 3-4 channels to achieve the current.

i want to know which customer need this, and what's the EE for this project?

0 Jimmy Lai over 2 years ago in reply to Frank Qiu

TI__Expert 6845 points

Hi Frank,

We appreciated your great support!

EE is EV charger. Customer is Ubiquiti networks.

Do we have any suitable solution for this case?

Thanks a lot!

Jimmy

0 Frank Qiu over 2 years ago in reply to Jimmy Lai

TI__Genius 15776 points

Hi Gracie, please help to follow this thread. And align with Cen Yang since it's a new EE for us.

0 Jimmy Lai over 2 years ago in reply to Jimmy Lai

TI__Expert 6845 points

Hi Gracie,

Do we have any suitable solution for this case?

Thanks a lot!

Jimmy

+1 Gracie Guo over 2 years ago in reply to Jimmy Lai

TI__Genius 10576 points

Hi Jimmy.

Since TLC6A598 is a high-reliability driver for avionic applications and cost $5 each which is a little expensive for normal LED driver, I'm pretty interested in the detailed introduction of this customer 'Ubiquiti networks' and what they need this LED driver for. Also, I notice that

Jimmy Lai said:
Current rate should be at least 1A.

the demanding current rate is really large and is not a common need. Why do they need such large current? I also wonder if they have RGB need.

Besides, what's the quantity of their needs?

You can directly mail to me.

Gracie.

+1 Gracie Guo over 2 years ago in reply to Jimmy Lai

TI__Genius 10576 points

Hi Jimmy,

It seems that in a recent week, you do not respond to this question any more. So I want to know if this question matters to you right now. If so, please provide the details above.

Power management

Power management forum

TLC6A598: TI solution suggestion