TPS40200EVM-001: 3d design files

Sunaina Srivastava

Prodigy 50 points

Part Number: TPS40200EVM-001

Hi TI team

Please provide the 3d design file and mechanical dimensions for the TPS40200EVM-001

over 3 years ago

0 Timothy Hegarty over 3 years ago

TI__Guru 69627 points

Hi Sunaina,

This is an older EVM, so we may not have the PCB design files available.

Please consider using the LM5145 synchronous buck controller instead. There are two EVM designs for this controller family that you can refer to: LM5145EVM-HD-20A 5V/20A/225kHz and LM5146-Q1-EVM12V 12V/8A/400kHz (and these have the PCB design files loaded in the applicable product folder).

Regards,

Tim

0 Sunaina Srivastava over 3 years ago in reply to Timothy Hegarty

Prodigy 50 points

I need a part which has 12V input and 3.3V output . The suggested parts do not fit in. In case there is an evm matching please let me know

0 Timothy Hegarty over 3 years ago in reply to Sunaina Srivastava

TI__Guru 69627 points

What's the output current requirement? and max Vin? You could use a buck converter with integrated FETs for a compact, easy-to-design solution. See the LM61460 6A converter as an example.

Regards,

Tim

The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.

Power management

Power management forum

TPS40200EVM-001: 3d design files