Hi Expert,
Could you please let me know the max spec of minimum on time (60ns/typ)?
My customer plan to use this device for 24V to 3.3V.
Thanks
Muk
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Expert,
Could you please let me know the max spec of minimum on time (60ns/typ)?
My customer plan to use this device for 24V to 3.3V.
Thanks
Muk
Hi Andy-san
Customer have an additional question about spec.
Could you please let me know the min and max value for Ven_hys?
Thanks
Muk
Hi Andy-san
Thank you for your answer.
Sorry, the customer have an additional request about datasheet spec.
Do you know the max and min value for the following I PEAK_MIN(for light load mode)?
8.4.4 Light-Load Operation (PFM Version)
During light load operation, Pulse Frequency Modulation (PFM) mode is activated to maintain high efficiency operation. When either the minimum high-side switch ON time tON_MIN or the minimum peak inductor current I PEAK_MIN (300 mA typical) is reached, the switching frequency decreases to maintain regulation.
Thanks
Muk
Hi Muk,
Sorry I PEAK_MIN is not data sheet spec, so there is no Min/Max value. for rough estimation, the variation is about +/-50%.
B R
Andy