Other Parts Discussed in Thread: BQEVSW, BQSTUDIO, EV2400
I connected the Li-ion battery to the EV2300 via the SMB ports, but the BMS studio does not recognize the device. The RRC2040 I believe has a TI bq20z95 fuel gauge Chipset, which I do not think the software supports. Is there any chance that these chipsets are universal for the software to be compatible to work with?
Moreover, I tried "SMBD-SMBC/SMBC-SMBD" connection on the Li-ion to EV2300 end, and also the same connection type (SMBD-SMBD/SMBC-SMBC), both ways did not work. Not sure which way was the correct connection.