Hi team,
Looking for an eFuse with configurable OVP clamp (not cut-off). Is there any stability concerns if to connect the OVP pin of TPS2662x eFuse through a resistor divider to the OUT pin instead of the IN pin?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
Looking for an eFuse with configurable OVP clamp (not cut-off). Is there any stability concerns if to connect the OVP pin of TPS2662x eFuse through a resistor divider to the OUT pin instead of the IN pin?