LM5050-2: LM5050MK-2 Top marking "SZJB", but the "S" on chip surface is different as before.

Linna Raw

Prodigy 105 points

Part Number: LM5050-2

The first letter "S" of top marking in Picture 1 and Picture 2 are different.

Are these 2 types of "S" normal? Any document to prove this change?

Anyone can help to advise the difference?? Thank you for your quick reply.

Date Code: 1743. Picture 1:

Date code: 2101+5. Picture 2:

over 2 years ago

0 Praveen GD over 2 years ago

TI__Guru 57737 points

Hi Linna,

Please give me a couple of days to verify this and get back to you.

0 Linna Raw over 2 years ago in reply to Praveen GD

Prodigy 105 points

ok, waiting for your news.

Thanks very much for your reply.

0 Praveen GD over 2 years ago in reply to Linna Raw

TI__Guru 57737 points

Yes Linna. Started working on getting you information. Will get back to you soon.

0 Praveen GD over 2 years ago in reply to Praveen GD

TI__Guru 57737 points

Hi Linna,

Can you please provide the lot codes printed on the boxes / reels for the ICs with different top side marking. This should help us answer your question.

+1 Praveen GD over 2 years ago in reply to Praveen GD

TI__Guru 57737 points

Hi Linna,

I have checked with our quality team. They have mentioned that both the fonts are valid TI fonts and no concerns with the top side markings on these devices.

Power management

Power management forum

LM5050-2: LM5050MK-2 Top marking "SZJB", but the "S" on chip surface is different as before.