This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLV1117LV: output inductance

Part Number: TLV1117LV

Hi team,

When using TLV1117LV12,  found that 1.2-V output (used to power the FPGA) voltage reaches to high above 1.5V, and such pheonmenon is caused by a 10uH inductance in series on the output side. After replaced with a 0 Ω resistor, and the problem was resolved.  Is there any idea that TLV1117LV12 can not work with  series inductance?  While for 

Best Regards