Hi Sir,
About the PoE software how to modify GUI even flag into main code?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Tommy,
Thank you for your question. Our PSE expert is out of the office until the week of 8/30 however I will try my best to help answer your question in the meantime.
Are you interested to know how to flash the MSP430 with the port power management code image generated from the GUI? If so, this is covered in our Offline Mode FirmPSE training video (link below). If this is not your question, could you please provide some more details about what you are asking?
As FYI - Here are our short videos on how to use the GUI in offline mode/online mode. These may help to answer your question:
https://training.ti.com/pse-system-firmware-gui-training-online-mode
https://training.ti.com/pse-system-firmware-gui-training-offline-mode
https://training.ti.com/poe-firmware-ecosystem-minimal-effort-faster-production
If this post answers your question, please indicate so by marking this thread as resolved. Thank you.
Best Regards,
Brett Colteaux