Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 64 subscribers
  • Views 155 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS54310: Simulation on powering up with slow start pin

Takeshi Sasaki
Expert 4480 points
Part Number: TPS54310
Other Parts Discussed in Thread: TINA-TI

Hi team,

Could you give me comment on following customer question?

Q1. Could you tell me how to study powering up with slow start operation? When the customer downloaded TPS54310 TINA-TI Average Reference Design, the model doesn't have SS/ENA pin, and it includes some missing pins like SYNC. What is recommended method for studying TPS54310? The customer has to use Pspice?

Best regards,

Takeshi Sasaki