This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC21540: UCC21540

Part Number: UCC21540

IN Application report of UCC21540, full bridge converter circuit diagram has given.I am using UCC21540 for full bridge application.I have generated 2 PWM Signals to drive the converter.First signal is given to INA of U1 and same signal is given to INB of U2. Second signal is given to INB of U1 & same signal is given to INA of U2.I want to know whether it is correct or not.

  • Hi Payal,

    You are correct, the full bridge can be controlled with two PWM signals as you described.

    If you have further questions, just let us know, or if this answers your question please let us know by clicking the green button.