REF34-Q1: 4pin and 5pin NIC pin terminal processing

Yoshiki Ochi

Expert 7585 points

Part Number: REF34-Q1

Hi team,

Do you recommend 4pin and 5pin NIC pin terminal processing as short to GND or left open for REF34xxQ1 (DGK) ?

Regards,
Ochi

over 2 years ago

+1 Ben C over 2 years ago

TI__Mastermind 28325 points

Hi Ochi-san,

The datasheet says "No Internal Connection" so therefore the pins can be either tied to GND or left open. Connecting pin 4 and pin 5 to GND should be okay.

Ben

0 Ben C over 2 years ago in reply to Ben C

TI__Mastermind 28325 points

Hi Ochi-san,

Are there any updates?

Ben

Power management

Power management forum

REF34-Q1: 4pin and 5pin NIC pin terminal processing