Other Parts Discussed in Thread: UCC28610
We want to use the enable function on the UCC28610. We have experimented with shorting the MOT pin to ground, and indeed the converter shuts down. But the problem is, that on the 12V 2.1A eval board, the power consumed from 230V mains then increases to 0.75W, while one reason to disable this power supply would be to reduce power consumption to sub 30mW. The power supply will have a "sister" supply, of basically the same design, which will keep running. Maybe this can be used to provide the aux supply? Is there a solution to this high power consumption when disabled?
