This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS65150: TPS65150

Part Number: TPS65150


We are using TPS65150 in our design. As per the datasheet section 7.3.5, VCOM will start once Vcpi reaches its final value.
We want sequencing as VCOM starts once VGH is reached its final value.

With default option, VCOM is rising before VGH reaches its final value.
Attached the capture for your reference.

Please suggest if there are any option to give more delay for VCOM

Thanks & Regards,