Hi Team,
how long it should roughly take for a BQ40Z50-R2 to exit IATA shutdown mode with CHECK_WAKE bit =0?
i.e. From the time "Voltage at PACK pin > VSTARTUP" to when the LEDs turn on?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
how long it should roughly take for a BQ40Z50-R2 to exit IATA shutdown mode with CHECK_WAKE bit =0?
i.e. From the time "Voltage at PACK pin > VSTARTUP" to when the LEDs turn on?
Hi,
If IATA is disabled it will follow the standard boot sequence which could take up to 2.5seconds. You can monitor the [INIT] flag to know when the gauge is ready.
Thanks,
Jackson